Finish with excellent durability and reliable performance on wooden floors in highly trafficked public locations. Easy to apply on large surfaces, hardwearing and easy to maintain. Can be used to protect untreated wood as well as prefinished parquet.
AVAILABLE SHEEN LEVELS
Consumption: 8-10m2/Litre (120-100g/m2) per coat
Warning: Last items in stock!
Traffic is a two-component waterborne 100% polyurethane finish for the surface treatment of wooden floors in commercial premises where a very high resistance to wear is required. It is also suitable for overcoating factory pre-finished cork floors. Traffic Matt provides a clear natural appearance giving “invisible protection” and the look of an oiled floor but, unlike oil, offers years of virtually maintenance-free protection. Traffic Silk Matt has a higher sheen level but all the other qualities of the matt version.
• Supreme finish for commercial areas
• Excellent resistance to wear
• Excellent application and levelling properties for a flawless result
• Suitable for recoating already finished surfaces*
• Non-yellowing surface
• Classified EC1R for very low emissions and indoor air pollution
• Friction approved to both EN 14904:2006 and DIN 18032:2
• Meets ÖNORM C 2354 Category C (Very Heavy Wear)
Prior to application the surface must be pre-treated with a waterborne primer from Bona. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer and hardener to reach room temperature, insert filter and shake the container thoroughly before use.
Optimal application conditions are between 18-25C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13C.
Preparation of previously lacquered floors Bona Traffic has in general very good adhesion to factory pre-finished and previously lacquered floors but the surface must be carefully cleaned and abraded prior to overcoating. See separate guideline for overcoating recommendations.
Size of trading unit : 1L; 5L Classic, light wood look and classic formula producing a well-bodied surface. Soft, flexible film reducing potential effects of side-bonding. Forgiving application properties. Suitable on practically all types of wood. Non-yellowing. Consumption: 8-10m2/Litre (120-100g/m2)
Size of trading unit: 5L For a medium rich wood colouration. Excellent abrasion properties and highly suitable for floors with underfloor heating and/or moving floors such as end grain or plank floors. Suitable on practically all types of wood and especially on tropical wood. Consumption: 8-10m2/Litre (120-100g/m2)