BONA Traffic HD View larger

BONA Traffic HD 4,95L Parquet Lacquer

New product

Size of trading unit : 4.5L + 0.45L Hardener


The world’s toughest and fastest drying lacquer for wooden floors exposed to extreme wear allowing full traffic to be resumed in just 12 hours.

AVAILABLE SHEEN LEVELS
  • Matt
  • Silkmatt
  • Extra matt

Consumption: 8-10m2/Litre (120-100g/m2) per coat 


BONA Logo


Lieferung Delivery in 2-3 working days, within europe in 3-6 working days after receiving payment

More details

in Stock

206,90 EUR Tax included

Shipping excluded

41,79 EUR per Liter

  • Silkmatt
  • Matt
  • Extra matt

Add to wishlist

Ask about product
BONA Traffic HD 4,95L Parquet Lacquer

BONA Traffic HD 4,95L Parquet Lacquer

Size of trading unit : 4.5L + 0.45L Hardener


The world’s toughest and fastest drying lacquer for wooden floors exposed to extreme wear allowing full traffic to be resumed in just 12 hours.

AVAILABLE SHEEN LEVELS
  • Matt
  • Silkmatt
  • Extra matt

Consumption: 8-10m2/Litre (120-100g/m2) per coat 


BONA Logo


Lieferung Delivery in 2-3 working days, within europe in 3-6 working days after receiving payment

I accept privacy policy rules  

Beating Time
Bona Traffic HD – Powerful performance at top speed


Used in hotels, restaurants and airports worldwide, where short downtime is essential. Waterborne and very low VOC and odor. Clear, non-yellowing lacquer perfected for wooden floors.

KEY BENEFITS
• Ultimate speed and durability
• Allows full traffic after 12 hours
• Easy and safe to apply
• Very low odour
• GreenGuard Gold certified for very low indoor emissions. Recommended for schools and nurseries
• EC1RPlus classified for very low emissions (the industry’s most stringent standard on indoor emissions)
• Very low solvent content (VOC), <5%



 

Consumption: 8-10 m2/litre (120-100g/m2) per coat
Required water quantity: If required, dilute with 4% Bona Retarder for a longer open time
Working time: 4 hours at 20C (shorter if warmer)
Drying times: Ready for sanding/recoating: 2-3 hours* - Full use: 12 hours* - Possible to cover: 3 days*
* At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate.
Manufacturer: BONA
  • Quick view
    From 31,00 EUR in Stock Tax included
    Shipping excluded

    Size of trading unit : 5L Classic, light wood look and classic formula producing a well-bodied surface. Soft, flexible film reducing potential effects of side-bonding. Forgiving application properties. Suitable on practically all types of wood. Non-yellowing. Delivery in 2-3 working days, within europe in 3-6 working days after receiving payment

    From 31,00 EUR Tax included
    Shipping excluded
    in Stock
  • Quick view
    123,10 EUR in Stock Tax included
    Shipping excluded

    For a medium rich wood colouration. Excellent abrasion properties and highly suitable for floors with underfloor heating and/or moving floors such as end grain or plank floors. Suitable on practically all types of wood and especially on tropical wood. Consumption: 8-10m2/Litre (120-100g/m2)  Delivery in 2-3 working days, within europe in 3-6...

    123,10 EUR Tax included
    Shipping excluded
    in Stock
  • Quick view
    22,50 EUR in Stock Tax included
    Shipping excluded

    Synthetic roller for the application of lacquer. Designed specifically for the application of Bona waterborne finishes. Delivery in 2-3 working days, within europe in 3-6 working days after receiving payment

    22,50 EUR Tax included
    Shipping excluded
    in Stock
Preparations: 

Prior to application the surface must be pre-treated with a waterborne primer from Bona. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer and hardener to reach room temperature.
 
Optimal application conditions are between 18-25C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13C.
 
Preparation of previously lacquered floors Bona Traffic HD Anti-slip has in general very good adhesion to factory pre-finished and previously lacquered floors but the surface must be carefully cleaned and abraded prior to overcoating. See separate guideline for overcoating recommendations.


Treatment schedule

Untreated wood: 
Previously lacquered surfaces:
1x Bona Primer or Bona Craft Oil 2K 
Cleaning and superficial abrasion
2x Bona Traffic HD  1-2x Bona Traffic HD     
 
Observe: It is not recommended to apply more than two full coats per day due to risk of excessive wood swelling. Ensure good ventilation during drying. Poor drying conditions may result in a weakened film with worsened adhesion

Application

1. Shake the Traffic HD can and add one bottle of Traffic HD Hardener. Immediately shake the mixture thoroughly for 1 minute and then insert the enclosed filter. If mixing smaller quantities of lacquer then pour the required amount of lacquer into a separate can. 1 litre of lacquer corresponds to one part of hardener. 2 litres to two parts a.s.o. The mixture of lacquer/hardener should be used directly or at least within 4 hours.

2. Apply the lacquer using a Bona Roller. Roll with a smooth, flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.  Allow to dry properly before applying further layers. Anticipate slightly longer drying time for each layer that is applied. 

3. If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying a final layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required. Floor will take light foot traffic approximately 8 hours after the final application and may be put into full use after 12 hours. Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings. Also avoid placing heavy objects and avoid damp mopping the floor during this time.

Note: If Traffic HD has been combined with Bona Prime Deep and Bona Create then the surface must be allowed to cure for 1 week before covering the surface.

Maintenance

Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad. For maintenance and long term protection of the surface, floors can be overcoated at intervals with additional coats of lacquer. The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically. This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber.
 

  

Customers who bought this product also bought:

30 other products in the same category: