BONA Novia 5L, 10L View larger

BONA Novia 5L, 10L

New product

Size of trading unit : 5L, 10L 


A multi-purpose finish that can be used with or without a primer for the full protection of untreated wood in domestic environments.
AVAILABLE SHEEN LEVELS
  • Matt
  • Silkmatt

Consumption: 8-10m2/Litre (120-100g/m2) per coat 


BONA Logo

More details

in stock

78.20 EUR Tax included

Shipping excluded

15.64 EUR per Liter

  • 5L
  • 10L
  • Silkmatt
  • Matt

BONA NOVIA 


A multi-purpose finish that can be used with or without a primer for the full protection of untreated wood in domestic environments.

BONA NOVIA brings out a warm colouration in wooden floors and is easy to use thanks to its forgiving application properties. Good resistance to scuffs and common household chemicals. Bona Novia can with advantage also be used for the initial or full treatment of untreated cork floors.

KEY BENEFITS
• ECO-labelled performance
• Requires no primer
• Good resistance to wear
• Forgiving application properties
• Very low, non-offending odour
• Non-yellowing
• Quick drying




 

Consumption: 8-10 m2/litre (120-100g/m2) per coat
Required water quantity: If required, dilute with 4% Bona Retarder for a longer open time
Drying times: Ready for sanding/recoating: 1-2 hours* - Full use: 24hours* - Possible to cover: 7 days*
* At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate.
Manufacturer: BONA
  • Quick view
    From 16.60 EUR in stock Tax included
    Shipping excluded

    Size of trading unit : 1L; 5L Classic, light wood look and classic formula producing a well-bodied surface. Soft, flexible film reducing potential effects of side-bonding. Forgiving application properties. Suitable on practically all types of wood. Non-yellowing. Consumption: 8-10m2/Litre (120-100g/m2) 

    From 16.60 EUR Tax included
    Shipping excluded
    in stock
  • Quick view
    15.50 EUR in stock Tax included
    Shipping excluded

    Synthetic roller for the application of lacquer. Designed specifically for the application of Bona waterborne finishes.

    15.50 EUR Tax included
    Shipping excluded
    in stock

Preparation


Prior to application the surface must be pre-treated with a waterborne primer from Bona. Ensure floor is acclimatized to its end-use environment, well sanded, dry and free from sanding dust, oil, wax and other contamination. Allow lacquer to reach room temperature, insert filter and shake the container thoroughly before use. 
 
Optimal application conditions are between 18-25C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13C.

Treatment schedule


Untreated wood, opt. 1: 
1x Bona Primer 
Light sanding grit 150 
2x Bona Novia


Untreated wood, opt. 2:*

1x Bona Novia 
Light sanding grit 150  
2x Bona Novia
 
*For floors where there is a risk of sidebonding, e.g. endgrain floors, softwood plank floors and hardwood floors with underfloor heating, it is recommended to always use a primer before applying Novia, as well as taking measures to stabilize the climate. 
 
Note: It is not recommended to apply more than two full coats per day due to risk of excessive wood swelling.
 

 Application

       
Apply the lacquer using a Bona Roller. Roll with a smooth flowing motion alternately across and with the grain of the wood avoiding accumulations of product. Always maintain a “wet edge” to avoid overlaps.   2. Allow to dry before applying another layer of lacquer. Anticipate slightly longer drying time for each layer that is applied. If necessary make an intermediate sanding using a screen or the Bona Scrad System grit P150 (or finer) and remove dust before applying the final layer of lacquer. Note: If the previous layer of lacquer has been allowed more than 24 hours drying time then an intermediate sanding is always required. The floor will take light foot traffic approximately 8 hours after the final application. Allow the surface to dry for at least 1 week before covering with carpets or other floor coverings, or loading with heavy objects. Also avoid damp mopping the floor during this time.

Maintenance


Clean the floor with Bona Cleaner or Bona Wood Floor Cleaner and a microfibre pad. For maintenance and upkeep of the surface, floors can be overcoated at intervals with additional coats of lacquer. The frequency of this operation can be greatly reduced if Bona Freshen Up or Bona Wood Floor Refresher is applied periodically. This will restore the appearance of a dull floor whilst still allowing further coats of lacquer to be applied without the need for sanding the floor back to bare timber.
 
Detailed maintenance instructions are available at www.bona.com/floorcare

Customers who bought this product also bought:

13 other products in the same category: