OLI-NATURA Hard Wax Oil 0,25L, 1L, 3L

New product

Size of trading unit: 0,25L; 1L; 3L


Hard Wax Oil for basic treatment of floors, stairs, doors and furniture surfaces made of wood, cork and OSB board. For interior in colourless.

Gloss value:
 Semi matt (without polishing), semi gloss (with polishing)

Consumption: 1-2 coats I depending on the application area and absorptivity of the substrate 40-50 g/sqm per coat (20-25 sqm/l)



Oli Lacke Logo Oli Lacke Natura

More details

IMMEDIATELY AVAILABLE

13.10 EUR Tax included

Shipping excluded

52.40 EUR per Liter

  • 0,25L
  • 1L
  • 3L

OLI-NATURA Hard Wax Oil

Hard Wax Oil for basic treatment of floors, stairs, doors and furniture surfaces made of wood, cork and OSB board. For interior in colourless.

  • Combination of oil and wax with a solid content of 60%
  • Preserves the wood from the inside, forming an open-pored, breathable film
  • Exceptional protection - extremely stain resistant, water and dirt repellent, non-slip, easy to maintain and easy to repair,
  • Lends a beautiful look and feel to the wood - only discreetly emphasises the natural colour of the wood
  • Particularly uniform creation of gloss - with or without to buff
  • Easy-to-use formula - makes it very easy to roll, brush, and spray 
  • Efficient: 1-2 coats of 40-50 g/m² each (1 litre is sufficient for 20-25 m² per coat)
  • allergy-friendly (ECARF-certified), DIBt-certified, cobalt-/oxime-free, safety of toys DIN EN 71-3, DIN 53160 (resistant to saliva and perspiration)


A true classic: OLI-NATURA Hardwax Oil is made of vegetable oils, waxes and resins. It has a pleasantly silky touch, subtly highlights the natural look of the wooden surface, and is excellently resistant against chemicals and abrasion. It is easily applicable by hand or machine, in one to two coats. By polishing the surface with a pad, it gains a natural mattness. Without polishing, the surface shows a silky gloss.
 
Hartwachsöl

Optics & haptics

The colorless hard wax oil enhances the natural color of the wood only a bit, which is often desired with light woods such as spruce, pine, maple, ash or white beech. The treated surface is very natural and has a velvety soft haptics. Without polishing, the surface appears slightly shining. By carefully polishing the hard wax oil is massaged deeper into the wood and becomes noticeably matte.

Colors:Nature/uncoloured

Safety

The oil is FREE of preservatives, biocides, cobalt and oxime. The cured material is safe for humans, animals and plants. It complies with DIN EN 71-3 (safety of toys), DIN 53160 (resistant to saliva and perspiration, allergy-friendly (ECARF) and is a building product approved by the German Institute for Structural Engineering (DIBt).


Consumption: 1-2 coats of 40-50 g/m² each
Working temperature: min. 15 °C at ground level
Ready for foot traffic/ can be skimmed over: 1-2 H
Final strenght: after 1-2 days
* At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate.
Manufacturer: Oli Lacke

Customers who bought this product also bought:

13 other products in the same category: