WOCA Invisible Oil (step 2) 1L, 2,5L View larger

WOCA Invisible Oil (step 2) 1L, 2,5L

New product

Size of trading unit: 1L; 2,5L


  • Gives the floor an untreated appearance
  • Resistant to liquids such as water, coffee, tea and red wine
  • Gives the wood a beautiful, breathable 'soft feel' surface
  • IBR-certified

WOCA Logo

More details

in Stock

39.90 EUR Tax included

Shipping excluded

39.90 EUR per L

  • 1L
  • 2,5L

WOCA Invisible Oil (step 2)

Invisible Oil is a water-based single-component low-odour floor oil that is made from the very best quality ingredients. This means extremely tough protection and gives the wood a matt, untreated appearance when used together with WOCA Invisible Oil Primer. The oil is particularly well-suited for machine polishing of light wood varieties, both untreated and newly-sanded. Invisible Oil is the second stage in a high quality water-based oiling system and should therefore be used together with WOCA Invisible Oil Primer.

Consumpion: 30-40m2/L


Technical Data

Product properties
Solid content 40%
Draying time: Minimum 8 hours at 200C
Density: 1-1,1g/ml
Colours: neutral
Fully hard 7 days at 20° C  
Application tools: A polishing machine with beige polishing pad. Paintroller and cotton cloths.
Cleaning of tools: With Solvent.
Disposal Empty containers and residues to be disposed of according to local regulations.
Available pot sizes: 1 L - 2.5 L
Storage Store safely, out of reach of children Do not expose to heat (e.g. sunlight). Store frost-free.

Product, room and floor temperature must be between 15-30°C. Ensure good ventilation during application and when drying. The wood should be primed with Invisible Oil Primer and then sanded with a bordeaux sanding pad or a lacquer sanding pad. Thoroughly vacuum clean the surface afterwards.

1 Thoroughly shake the container of oil, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.

2 Apply Invisible Oil using a short-bristled paint roller in an even coat. Work in small areas of no more than 20 m² at a time.

3 Leave the oil to soak in for up to 5 minutes.

4 Rub the oil into the wood until the floor appears saturated. Use a buffing machine with a beige or bordeaux pad. Regularly change the buffing pad to prevent the oil from lumping.

5 Remove excess oil with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.

6 The surface can be used with caution the following day and is fully hardened after 7 days under normal indoor conditions.

Do not expose the floor to water or other liquids for the first 7 days, while the oil is hardening. After 7 days, we recommend that the surface is treated with Invisible Oil Care to improve the floor’s resistance to stains and wear. For optimal cleaning, we recommend WOCA Natural Soap White, which cares for and maintains the surface.

Customers who bought this product also bought:

20 other products in the same category: