WOCA Hardwax oil Swift 2,5L Natur, white View larger

WOCA Hardwax Oil Swift 2,5L Natural or White


New product

Size of trading unit: 2,5L

  • Does not need to be rubbed into the wood
  • Resistant to liquids such as water, coffee, tea and red wine
  • Resistant to scratches and marks
  • Gives the wood a natural appearance and breathable surface
  • Easy to maintain using associated care products


More details

in Stock

107.90 EUR Tax included

Shipping excluded

43.15 EUR per L

WOCA Hardwax oil Swift 

Woca Hardwax Oil Swift is a quick drying, low-odour roll-on product for the oil treatment of wooden floors. It is incredibly easy to apply, since it does not need to be rubbed into the wood. Hardwax Oil Swift combines natural oil and wax in a single product, ensuring an extremely robust surface with high resistance to spills and stains. It gives the floor a neutral appearance and a comfortable non-slip surface that is easy to maintain. The product is suitable for base treatment of untreated, new or newly-sanded wooden surfaces, or as a topcoat on top of WOCA Master Colour Oil.

Consumpion: 30-40m2/L

Technical Data

Product properties
Solid content 40%
Draying time: Minimum 4-5 hours at 200C
Density: 0,9g/ml
Colours: natural and white
Fully hard 7 days at 20° C  
Application tools: Paintroller with 4mm 
Cleaning of tools: With Solvent.
Disposal Empty containers and residues to be disposed of according to local regulations.
Available pot sizes:  2.5 L
Storage Store safely, out of reach of children Do not expose to heat (e.g. sunlight). Store frost-free.

Hard Wax oil Swift 

It is important that the product, the room and the floor are at a temperature between 15 °C and 30 °C and that air humidity is approx. 50 %. Wood humidity must not exceed 12%. Make sure that the room is well-ventilated for optimal evaporation and drying time.
The floor must be free of dirt, grease, wax and sanding residue. Previously treated floors should be sanded down to bare wood with grain 120-150. Vacuum thoroughly and wipe the floor down afterwards if necessary, using a tightly-wrung water-soaked cloth. Hardwax Oil Swift is ready for use.

1. Hardwax Oil Swift should be stirred thoroughly before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.

2. Apply a thin layer of oil using a short-bristled paint roller (3-4 mm) or similar, along the grain of the wood. Distribute the oil thoroughly. 3 Leave the floor to dry for 4-5 hours. Drying time will vary by temperature, humidity and application quantity. Lower temperatures and/or higher humidity can extend drying time.
4 Repeat steps 2-3 if another coat of oil is required. A single coat of oil is normally enough for previously-oiled surfaces.

5. Clean tools with WOCA Solvent.

6. The newly-oiled floor can be used with caution the following day and is fully hardened after 7 days under normal indoor conditions. Do not expose the floor to water or clean it for the first 7 days, while the oil is hardening.

Regular cleaning: WOCA Natural Soap or WOCA Oil Refreshing Soap. Regular maintenance: WOCA Oil Care. Re-oil with Hardwax Oil Swift or WOCA Maintenance Gel as required.

Customers who bought this product also bought:

27 other products in the same category: