BONA Prime Classic 1L, 5L

New product

Size of trading unit : 1L; 5L


Classic, light wood look and classic formula producing a well-bodied surface. Soft, flexible film reducing potential effects of side-bonding. Forgiving application properties. Suitable on practically all types of wood. Non-yellowing.

Consumption: 8-10m2/Litre (120-100g/m2) 

BONA Logo

More details

in Stock

16.60 EUR Tax included

Shipping excluded

16.60 EUR per Liter

  • 1L
  • 5L

Classic, light wood look and classic formula producing a well-bodied surface. Soft, flexible film reducing potential effects of side-bonding. Forgiving application properties. Suitable on practically all types of wood. Non-yellowing.

Designed for use with all Bona waterborne finishes

  • Light colouration
  • High solids content
  • Elastic properties
  • Well-bodied surface
  • Reduced risk of side bonding, i.e. especially suitable for endgrain floors, softwood plank floors and hardwood floors with underfloor heating.
  • Non-yellowing

Bona Classic is a high solids, single component acrylate primer for use on wooden floors prior to overcoating with Bona waterborne finishes. It gives the surface a well-bodied appearance and reduces the risk of sidebonding due to its flexibility.

Application rate: 8-10 m²/ lit (120-100g/m²) per coat

Drying time: 1-2 hours at 20 0C/60% R.H.

Preparations

Ensure floor is acclimatized to its end-use environment. The surface which is to be treated must be sanded back to bare wood, dry and free from sanding dust, oil, wax and other contamination. It is recommended to finalize the sanding with a Bona Quattro or Multi Disc. 
 
Allow product to reach room temperature. Optimal application conditions are between 18-25°C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13°C.


Treatment schedule:
Untreated wood:  
1x Bona Prime Classic   
1x Bona Lacquer     Light sanding grit 150   
1x Bona Waterborne Topcoat   
 
 
Note: It is not recommended to apply more than two full coats per day due to risk of excessive wood swelling.
 
 

Consumption: 8-10m2/Litre (120-100g/m2)
Required water quantity: If required, dilute with Bona Retarder (4%) for longer open time.
Working temperature: 18 - 25°C
Drying times: 1-2 hours
* At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate.

Customers who bought this product also bought:

6 other products in the same category: