Consumption: 8-10m2/Litre (120-100g/m2)
Warning: Last items in stock!
For a medium rich wood colouration. Excellent abrasion properties and highly suitable for floors with underfloor heating and/or moving floors such as end grain or plank floors. Suitable on practically all types of wood and especially on tropical wood.
Medium wood colouration
Excellent abrasion properties
First choice for underfloor heating
Reduces potential for side-bonding
GreenGuard approved for low indoor emissions
• Medium wood colouration
• Excellent abrasion properties
• First choice for underfloor heating
• Reduces potential for side-bonding
• GreenGuard approved for low indoor emissions
|Consumption:||8-10 m2/litre (120-100g/m2)|
|Required water quantity:||If required, dilute with 4% Bona Retarder for a longer open time|
|Drying times:||Ready for sanding/recoating: 1-2 hours*|
|*||At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate.|
Size of trading unit : 1L; 5L AVAILABLE SHEEN LEVELS Gloss Matt Silkmatt Extra matt Consumption: 8-10m2/Litre (120-100g/m2) per coat
Size of trading unit : 4.5L + 0.45L Hardener The world’s toughest and fastest drying lacquer for wooden floors exposed to extreme wear allowing full traffic to be resumed in just 12 hours.AVAILABLE SHEEN LEVELS Matt Silkmatt Extra matt Consumption: 8-10m2/Litre (120-100g/m2) per coat
Size of trading unit : 5L, 10L A multi-purpose finish that can be used with or without a primer for the full protection of untreated wood in domestic environments.AVAILABLE SHEEN LEVELS Matt Silkmatt Consumption: 8-10m2/Litre (120-100g/m2) per coat
Ensure floor is acclimatized to its end-use environment. The surface which is to be treated must be sanded back to bare wood, dry and free from sanding dust, oil, wax and other contamination. It is recommended to finalize the sanding with a Bona Quattro or Multi Disc.
Allow product to reach room temperature. Optimal application conditions are between 18-25C and 30-60% relative air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time. Minimum temperature for use is 13C.
1x Bona Prime Intense
Light sanding grit 150
2-3x Bona Lacquer
*Note: It is not recommended to apply more than two full coats per day due to risk of excessive wood swelling.
Using a Bona Roller, apply the primer evenly avoiding accumulation of product. Care should be taken to achieve a uniform level of timber saturation to avoid colour variation. Always maintain a ‘wet edge’ to avoid overlaps. 2. When dry, abrade to reduce grain raise using the Bona Scrad system or a sanding screen grit 150 or finer. 3. Remove all dust and apply 2-3 layers of a Bona Lacquer depending on wear resistance requirements.