✓ Scheucher BILAflor 500 – Oak Astig Natura, sanded, sharp edges
✓ 2-layer engineered parquet, 1-strip
✓ Dimensions: 11 × 70 × 500 mm, approx. 3.6 mm solid wood wear layer
✓ Ready-to-live finish: TENSEO CLASSICO, TENSEO X-MATT, SEDA
✓ Glue-down installation
✓ Suitable for underfloor heating (RT = 0.078 m²K/W)
✓ 30 years warranty for private residential use
✓ Made in Austria – pack content: 1.680 m² (48 strips)
— Scheucher Parkett · BILAflor® 500
BILAflor® 500 by Scheucher is a 2-layer engineered parquet for full-surface gluing that combines the advantages of glue-down and prefinished parquet. The noble-wood wear layer sits on a spruce carrier layer with predominantly vertical annual rings; the strips are stabilised at the ends with a plywood end piece, and the back is cut at regular intervals for optimal adhesive distribution.
The compact strip format 11 × 70 × 500 mm is made for herringbone, double herringbone, 3-fold braid, natural strips and stretcher bond. Produced 100 % in Austria with solar energy, guaranteed real wood — healthy for living, hygienic and easy to care for.
Four reasons to choose BILAflor® 500.
Herringbone, double herringbone, 3-fold braid, natural strips or stretcher bond — all formats of the range can be combined.
Approx. 3.5 mm noble-wood wear layer on a spruce carrier with plywood end pieces — stable and renovable several times.
Tongue and groove on all sides, glued over the full surface of the subfloor — also suitable for underfloor heating.
Scheucher gives a 30-year warranty for private residential use. Made in Austria.
Treated with natural oils and waxes — for a particularly natural wood look and feel. An initial treatment with care wax oil is required before use.
Factory UV-sealed, eco-friendly and formaldehyde-free surface. Initial care and regular maintenance recommended.
Solvent-free UV lacquer applied by the excimer process: physically matt, extremely scratch- and abrasion-resistant, colour-stable and practically maintenance-free.
All formats are suitable for underfloor heating (RT = 0.078 m²K/W; BILAflor 500 5.5: 0.087 m²K/W) and share the same tongue-and-groove profile. Wear layer: 490 and 1000 approx. 3.6 mm, 500 and 500 5.5 approx. 3.5 mm, 28.1200 approx. 2.7 mm.
Every floor is unique, with colour and grain variations, and darkens over time. For a healthy indoor climate the manufacturer recommends 30 to 65 % relative humidity at 18 to 24 °C. For gluing, low-emission adhesives with EMICODE EC1 or a Type I eco-label are recommended.
More about BILAflor from the manufacturerAll details, laying patterns and information directly on the Scheucher website.
To the Scheucher website →
Installation instructions and maintenance guidelines for Scheucher BILAflor Parquet Flooring. Please follow the care instructions corresponding to your floor's surface finish.
Documents are provided directly by Scheucher. Clicking a document opens the manufacturer's original PDF in a new tab.
