Loba SportFinish halbmatt
1K water-based sports parquet lacquer, semi-matt, for sports parquet and sports wood floors. According to the manufacturer, the lacquer meets the sliding friction coefficient of the European sports floor standard (EN 14904).
Your benefits
- Sliding friction coefficient according to sports floor standard EN 14904 (manufacturer's information)
- Good price-performance ratio
- Safe and simple application
- Ready to use, do not dilute
- High yield: approx. 100-120 ml/m² per coat (approx. 8-10 m² per litre)
Areas of use
- Sports parquet and sports wood floors
- New sealing and renovation (recoating) of sports floors
- Multi-purpose and sports halls, fitness and dance studios
Application
- Floor professionally sanded, dry and free of old coatings, oil, grease, wax, silicone and sanding dust
- New sealing: apply a suitable LOBA primer (EasyPrime, VivaPrime), let it dry, roll on the lacquer, intermediate sanding, apply a second coat
- Application tools: LOBA Lackwalze Deluxe 120, Lackwalze Microfaser 100-120 or Lackwalze FiberTech
- Stir well, do not pour onto the floor, use a LOBA sealing bucket
- Apply a maximum of 2 roller coats per day
- Renovation: remove care residues with LOBA CareRemover, neutralise with clear water, sand thoroughly, apply one coat (for third-party lacquers, do a trial coat and adhesion test first)
Technical data
- Consumption: approx. 100-120 ml/m² per coat (8-10 m²/l)
- Drying at +20 °C and 50 % relative humidity: carefully walkable, sandable and recoatable after at least 4 hours
- Light use after 24 hours, full load and covering after 5 days
- Recoating without intermediate sanding within 24 hours, afterwards only with intermediate sanding (LOBASAND hole pad or sanding mesh P120 or finer)
- Processing conditions: room temperature +15 to +25 °C, floor +15 to +22 °C, material +18 to +25 °C, relative humidity 40-75 %, max. wood moisture 12 %
- Certificates according to the manufacturer: DIN 18032 / EN 14904, FIBA Approved Equipment, DIBt approval, Emicode EC1, ASTM D2047
Tip: Ensure adequate ventilation and follow the manufacturer's safety and product information. Application should be carried out by professionals; we are happy to advise you.
Product Flyer