Oli Aqua Prime 15.81
Water-based 1K roller primer for sanded parquet and wood floors. It reduces edge bonding of the following water-based lacquer and emphasises the natural wood colour.
Your benefits
- Reduces edge bonding of water-based parquet lacquers
- Especially recommended for parquet on underfloor heating
- Ready to use, easy to apply with a roller
- Fast drying: can be recoated the same day without intermediate sanding (manufacturer's information)
- Emphasises the natural wood colour and reduces the risk of visible lap marks
- High yield: approx. 8-10 m² per litre per coat
Areas of use
- Sanded parquet and wood floors
- Especially recommended for solid boards, edge-laid lamellas, renovation floors and parquet on underfloor heating
Application
- Floor professionally sanded (grit 80/100/120), dry, sound and free of old coatings, oil, grease, wax, silicone, care product residues and sanding dust; remove sanding dust thoroughly
- Stir thoroughly before use, stir again occasionally during longer application
- Apply undiluted and evenly wet-on-wet with the OLI water-based lacquer roller (microfibre, 11 mm pile height), avoid lap marks and material build-up
- Work from a clean application container, do not pour the material directly onto the floor
- Build-up: one coat of OLI-AQUA PRIME 15.81, then two coats of OLI-AQUA DOMO 15.40, STANDARD 15.50 or TOP 51.20
- Clean tools with water immediately after use
Technical data
- Base: water-based 1K primer
- Consumption: approx. 8-10 m²/l per coat (application rate approx. 100-120 g/m²)
- Drying at +20 °C and 50 % relative humidity: recoatable after approx. 2-3 hours, can be overcoated the same day without intermediate sanding with the intended OLI-AQUA parquet lacquer
- Do not apply more than one full-surface primer or lacquer coat per day, apply the second lacquer coat the following day at the earliest
- Low temperatures, high humidity, high application rates and poor air exchange prolong drying
- Processing conditions: room, floor and material temperature ideally +15 to +25 °C, relative humidity 40-75 %, max. wood moisture 12 %
- Not suitable as a sole final coat
- Not recommended under OLI-AQUA AUTHENTIC 51.30, as the wood firing counteracts the desired raw-wood effect (manufacturer's information)
- Frost-sensitive: store and transport frost-free
Tip: Ensure adequate ventilation and follow the manufacturer's instructions. We are happy to advise you on application.
Technical Data Sheet