✓ Scheucher BILAflor 1000 – Oak Astig Natura, sanded, sharp edges
✓ 2-layer engineered parquet, 1-strip
✓ Dimensions: 11 × 90 × 1000 mm, approx. 3.6 mm solid wood wear layer
✓ Ready-to-live finish: TENSEO X-MATT, SEDA
✓ Glue-down installation
✓ Suitable for underfloor heating (RT = 0.078 m²K/W)
✓ 30 years warranty for private residential use
✓ Made in Austria – pack content: 2.160 m² (24 strips), up to 15% half-lengths possible
— Scheucher Parkett · BILAflor® 1000
BILAflor® 1000 by Scheucher is a 2-layer engineered parquet for full-surface gluing that combines the advantages of glue-down and prefinished parquet. The noble-wood wear layer sits on a spruce carrier layer with predominantly vertical annual rings; the strips are stabilised at the ends with a plywood end piece, and the back is cut at regular intervals for optimal adhesive distribution.
The long strip measuring 11 × 90 × 1000 mm is laid in stretcher bond or as natural strips; herringbone, double herringbone and 3-fold braid are available on request with BILAflor® 1000. Available in oak natural, knotty and rustic — either oiled/waxed (SEDA) or sealed (TENSEO X-Matt).
Three reasons to choose BILAflor® 1000.
Strip format 11 × 90 × 1000 mm for stretcher bond and natural strips — herringbone, double herringbone and 3-fold braid on request.
Approx. 3.6 mm noble-wood wear layer on a spruce carrier with plywood end pieces — stable and renovable several times.
Tongue and groove on all sides, glued over the full surface of the subfloor — also suitable for underfloor heating.
Treated with natural oils and waxes — for a natural wood look and feel. An initial treatment with care wax oil is required before use. Available for all decors.
UV lacquer applied by the excimer process with a physically matt surface. Initial care and regular maintenance recommended. Available for oak natural Natura and Perla, oak knotty Natura and oak rustic Natura.
All formats are suitable for underfloor heating (RT = 0.078 m²K/W; BILAflor 500 5.5: 0.087 m²K/W) and share the same tongue-and-groove profile. Wear layer: 490 and 1000 approx. 3.6 mm, 500 and 500 5.5 approx. 3.5 mm, 28.1200 approx. 2.7 mm.
Wood is a natural product. Colour and grain variations are characteristics of the natural product wood; deviations from the sample picture are therefore unavoidable. Every floor is unique and darkens over time.
More about BILAflor from the manufacturerAll details, laying patterns and information directly on the Scheucher website.
To the Scheucher website →
