• WOCA Exterior Wood Oil natural and colour

WOCA Exterior Wood Oil

Reference: 617931A
€24.95 per piece
€33.27 L
incl. VAT excl. shipping costs

0.75L · 2.5L

Exterior oil for terraces, decking and garden furniture, natural or in colour.

  • Durable, weather-resistant surface
  • Enhances the natural wood structure
  • Fast-drying
  • Slows the growth of mould and fungi
Legal guarantee at least 2 years – show information

Delivery within 1-3 workingdays in Germany, in EU 6-8 workingdays

WOCA · Exterior Oil

WOCA Exterior Wood Oil

A weather-resistant exterior oil for terraces, decking, garden furniture and other outdoor wood, available natural or in a range of colours.

Why choose it

  • Gives a durable, weather-resistant surface
  • Enhances the natural wood structure
  • Fast-drying between coats
  • Helps slow the growth of mould and fungi outdoors

Pack sizes

  • 0.75L — small areas, furniture and touch-ups
  • 2.5L — terraces and larger outdoor surfaces

Available shades

  • Natural, White, Teak, Black
  • Grey, Walnut, Bangkirai
  • Anthracite, Larch
Tip: Reapply every one to two years depending on weather exposure to keep the surface protected.
  • Price suffix
    per piece
  • Consumption
    8 - 12 m²/L
  • Working temperature
    15 - 30 °C, approx. 50 % humidity
  • Manufacturer
    WOCA
  • Final strenght
    after 24 - 48 hours at 20 °C

WOCA Exterior Wood Oil – How to Use

Before you start: Untreated softwoods (except red cedar) and larch must be pre-treated with WOCA Exterior Wood Primer first. Only work in dry weather and at a minimum of 13 °C – avoid strong direct sun and extreme heat. Test on a small, inconspicuous area first.
1
Clean the wood
Clean both new and previously treated wood surfaces with Exterior Wood Cleaner before starting the oil treatment.
2
Let it dry
Let the wood dry for at least 24 hours afterwards, so the residual moisture stays below 17 %. Remove any raised wood fibres with fine sandpaper (grit 120–150).
3
Stir well
Stir the oil thoroughly before use.
4
Apply the oil
Apply the oil in a thin, even coat with a brush or the WOCA oil applicator, starting at the end grain. The oil looks white while wet; it can take a few minutes for the wood to take on its oiled appearance as the water evaporates first.
5
Remove the excess
After no more than 5 minutes, remove any excess oil with a clean cotton cloth – pay particular attention to joints and cracks.
6
Repeat if needed
Repeat steps 4 and 5 if the wood still doesn't look saturated with oil.
7
Buff (optional)
Once the wood is dry, it can be buffed with a polishing pad or a buffing machine – this makes the surface extra hard-wearing.
Curing & notes: Depending on weather and temperature, it can take 24–48 hours at 20 °C for the oil to fully cure. During this time, the wood must not be exposed to any moisture. Untreated softwoods and larch always need WOCA Exterior Wood Primer first.

Note for furniture: For Exterior Wood Oil in Black, Anthracite and Walnut, we recommend re-oiling with the Natural shade to avoid any possible colour transfer.

Products you'll need

Applicator
Makes applying oil and lye easy
Exterior Wood Cleaner
Base cleaner for outdoor wood