• WOCA Diamond Oil Active White
  • WOCA Diamond Oil Active White

WOCA Diamond Oil Active White

Reference: 565507A
€69.90 per piece
€93.20 L
incl. VAT excl. shipping costs

0,75L · 2.5L

White floor oil for oiled wood with the performance of a 2-component oil in a single-component product.

  • Highly resistant to water, coffee, tea and red wine
  • Resists scratches and marks
  • 2K performance in a 1K oil
  • Room climate tested, VOC-free

Delivery within 1-3 workingdays in Germany, in EU 6-8 workingdays

WOCA · Diamond Oil

WOCA Diamond Oil Active White

A white floor oil for already-oiled wood that delivers the performance of a 2-component oil in a single-component product, gently lightening the wood while keeping it breathable and resilient.

Why choose it

  • Highly resistant to water, coffee, tea and red wine
  • Stable against scratches and marks
  • 2K performance from a 1-component oil
  • Room climate tested and VOC-free

Pack sizes

  • 0,75L — small rooms and touch-ups
  • 2.5L — larger floor areas

Good to know

  • For maintaining or refreshing oiled white wood floors
  • Stir well before use for an even tone
  • Apply thinly and evenly
Tip: Ideal for high-traffic areas that need extra resistance.
  • Price suffix
    per piece
  • Consumption
    20-25 m²/L
  • Drying times
    16-24 Hours
  • Manufacturer
    WOCA

WOCA Diamond Oil Active – How to Use

Before you start: The wood must be freshly sanded, finishing with grit 100–120. Product, room and floor temperature should be between 15–30 °C; ventilate well while applying and during drying. Test on a small, inconspicuous area first to check the result.
1
Clean the floor
Clean the floor with Intensive Wood Cleaner and let it dry for at least 24 hours at 20 °C before oiling.
2
Shake well
Shake the Diamond Oil Active container thoroughly before and during use. Mix containers with different batch numbers beforehand to avoid colour variation.
3
Apply the oil
Apply the oil evenly and generously over 5–10 m² using a short-pile paint roller, a floor applicator, or an oil roller.
4
Let it soak in
Leave it to absorb for at least 10–15 minutes; re-oil any dry spots directly.
5
Buff it in
Buff the oil into the wood until the surface looks saturated. Use a buffing machine with a beige pad for larger areas, or a polishing cloth/pad by hand for smaller ones.
6
Remove the excess
Remove excess oil with dry, lint-free cotton cloths until the surface no longer looks wet.
For an even better finish: For a particularly attractive finish and higher resistance, the floor can be polished again 8–10 hours after the first coat with an extra 1 dl of Diamond Oil Active per 10 m² – following the same process described in steps 5–6.
Walkability: The floor can be walked on carefully after 24 hours.
Tool cleaning: Clean tools with WOCA Solvent or turpentine.

Products you'll need

Intensive Wood Cleaner
Base cleaner for all surfaces
Natural Soap
Natural, nourishing cleaner
Maintenance Oil
Revitalises oiled wood floors