• WOCA Hardwax Oil Extreme Natural
  • WOCA Hardwax Oil Extreme Natural

WOCA Hardwax Oil Extreme Natural 2,5L

Reference: 529325A
€98.90 per piece
€39.56 L
incl. VAT excl. shipping costs

2.5L

Hardwax oil suitable for all wood floors, including large areas.

  • Suitable for large floor areas
  • Good resistance to water, coffee, tea and red wine
  • Slight film formation on the surface
  • Recommended for healthy indoor living

Delivery within 1-3 workingdays in Germany, in EU 6-8 workingdays

WOCA · Hardwax Oil

WOCA Hardwax Oil Extreme Natural

A versatile hardwax oil suitable for all types of wood floors, including large areas, giving good resistance with a slight, protective film at the surface.

Why choose it

  • Usable on all wood floor types
  • Suitable for large floor areas
  • Good resistance to water, coffee, tea and red wine
  • Recommended for a healthy indoor living environment

Pack size

  • 2.5L

Good to know

  • Coverage approx. 8–12 m² per litre
  • Slight film formation gives extra surface protection
  • Suitable for residential and larger commercial floors
Tip: Well suited to projects covering bigger floor areas in one go.
  • Price suffix
    per piece
  • Consumption
    20 m²/L
  • Drying times
    16-24 Hours
  • Manufacturer
    WOCA

WOCA Hardwax Oil Extreme – How to Use

Before you start: Product, room and floor should be at a temperature of 15–30 °C and around 50 % humidity; wood moisture must not exceed 12 %. Ventilate well because of the drying time and fumes. The floor must be free of dirt, grease, wax and sanding dust – sand previously treated floors back to bare wood with grit 100–120, vacuum thoroughly and, if needed, wipe with a well-wrung, damp cloth. Hardwax Oil Extreme is ready to use straight from the container. Test on a small, inconspicuous area first.
1
Stir well
Stir Hardwax Oil Extreme thoroughly before and during use. Mix containers with different batch numbers beforehand to avoid colour variation.
2
Apply the oil
Apply the oil straight onto the floor with a buffing machine and spread it out well, working in sections of 5–10 m². Let the oil sit wet on the surface for 5–10 minutes, adding more oil if needed. Note: after about 15–20 minutes, Hardwax Oil Extreme starts to seal the surface.
3
Buff in & remove excess
Buff the surface with a white or beige pad until the wood looks saturated. Remove excess oil with clean, lint-free cotton cloths before moving on to the next area. The floor should not look wet afterwards, and no oil should be left on the surface.
4
Let it dry
Let the floor dry for 24 hours at 20 °C. Drying time depends on temperature, humidity and the amount applied – lower temperature and/or higher humidity can extend it.
5
Repeat if needed
Repeat steps 2–3 if an extra coat, more sheen, or more resistance is desired. On surfaces that were already oiled before, one coat is usually enough.
6
Curing
The freshly oiled floor can be walked on carefully the next day and is fully cured after 7 days under normal room conditions. During these first 7 days, do not wet or clean the floor.
Tool cleaning: Clean tools with WOCA Solvent or turpentine.
For already-oiled floors: Usually a single coat is enough. For the best adhesion, lightly sand previously treated floors with a bordeaux pad before applying a coat of Hardwax Oil Extreme. After 7 days, the floor can be cleaned with WOCA Natural Soap or WOCA Oil Refreshing Soap, which also gives the surface extra protection.

Products you'll need

Intensive Wood Cleaner
Base cleaner for all surfaces
Master Colour Oil
Floor oil for oiled wood
Paint Roller Cylinder, 4 mm
Applies oils and hardwax oils in a thin, even coat for a high-quality finish