Deep black floor oil for oiled wood, highly resistant to liquids and scratches.
Highly resistant to water, coffee, tea and red wine
Stable against scratches and marks
Enhances the natural wood structure
Room climate tested
WOCA · Diamond Oil
WOCA Diamond Oil Active Carbon Black
A deep black floor oil for already-oiled wood, giving a striking dark finish along with strong resistance to liquids and everyday wear.
Why choose it
Deep, even black finish
Highly resistant to water, coffee, tea and red wine
Stable against scratches and marks
Leaves a breathable, natural-feel surface
Pack size
2.5L
Good to know
For maintaining or refreshing oiled black wood floors
Stir well before use for an even tone
Apply thinly and evenly
Tip: Ideal for statement floors with a bold, dark look.
Price suffix
per piece
Manufacturer
WOCA
WOCA Diamond Oil Active – How to Use
Before you start: The wood must be freshly sanded, finishing with grit 100–120. Product, room and floor temperature should be between 15–30 °C; ventilate well while applying and during drying. Test on a small, inconspicuous area first to check the result.
1
Clean the floor Clean the floor with Intensive Wood Cleaner and let it dry for at least 24 hours at 20 °C before oiling.
2
Shake well Shake the Diamond Oil Active container thoroughly before and during use. Mix containers with different batch numbers beforehand to avoid colour variation.
3
Apply the oil Apply the oil evenly and generously over 5–10 m² using a short-pile paint roller, a floor applicator, or an oil roller.
4
Let it soak in Leave it to absorb for at least 10–15 minutes; re-oil any dry spots directly.
5
Buff it in Buff the oil into the wood until the surface looks saturated. Use a buffing machine with a beige pad for larger areas, or a polishing cloth/pad by hand for smaller ones.
6
Remove the excess Remove excess oil with dry, lint-free cotton cloths until the surface no longer looks wet.
For an even better finish: For a particularly attractive finish and higher resistance, the floor can be polished again 8–10 hours after the first coat with an extra 1 dl of Diamond Oil Active per 10 m² – following the same process described in steps 5–6.
Walkability: The floor can be walked on carefully after 24 hours.
Tool cleaning: Clean tools with WOCA Solvent or turpentine.
Safety Data Sheet – WOCA Diamond Oil Active