New product
Size of trading unit : 5L
BONA WAVE 2K - Water-based 2-component varnish for the surface treatment of parquet and wooden floors in heavily used areas.
in Stock
Warning: Last items in stock!
Availability date:
Two-component, water-based polyurethane varnish for surface treatment of parquet and wooden floors in high-traffic areas.
The floor must be acclimatized to the climatic conditions of the installation site, properly sanded, dry, and free from sanding dust, oil, wax, or other contaminants. Both the varnish and hardener should be acclimated to room temperature. Insert the filter into the container neck, and shake the container thoroughly before use. Optimal working conditions are between 18–25°C and relative humidity of 30–60%. High temperatures and low humidity reduce drying time, while low temperatures and high humidity extend it. The minimum processing temperature is 13°C.
Preparation
Add the hardener to the varnish in the container and shake well for at least 1 minute. Process the mixed varnish immediately or within the pot life of approx. 4 hours. For partial quantities, carefully observe the mixing ratio.
Application
Use the Bona roller to apply the varnish at 8–10 m² per liter (120–100 g/m²). Work alternately across and along the wood grain, avoiding puddles. Always apply wet-on-wet to prevent visible overlaps. Do not pour the material directly onto the floor; instead, use an application container.
Drying
Allow sufficient drying time and ensure good ventilation.
Intermediate Sanding
If needed, perform intermediate sanding with a Bona sanding screen or the Bona Scrad System K150 (or finer). Remove sanding dust and apply another layer of varnish as described above.
Note: If the previous varnish layer or primer has dried for more than 24 hours, intermediate sanding is mandatory.
Ensure the floor receives a total of three applications (including primer and varnish).
Consumption: | 8-10m2/Litre (120-100g/m2) |
Required water quantity: | If required, dilute with Bona Retarder (4%) for longer open time. |
Working temperature: | 18 - 25°C |
Drying times: | 2-3 hours |
* | At 20° C and 65 % relative humidity, depending on the type of floor covering and the absorbency of the substrate. |
Synthetic roller for the application of lacquer. Designed specifically for the application of Bona waterborne finishes. Delivery in 2-3 working days, within europe in 3-6 working days after receiving payment
Size of trading unit : 5L Improved version of BONA prime classicWater-based primer for untreated wood floors that produces a medium light wood tone. Delivery in 2-3 working days, EU in 4-7 working
123,10 EUR
23,10 EUR
22,50 EUR
24,90 EUR
57,90 EUR
3,65 EUR
9,90 EUR
22,90 EUR
9,90 EUR
17,90 EUR
10,75 EUR
1,13 EUR
29,90 EUR
29,90 EUR
179,00 EUR
21,38 EUR
43,64 EUR
10,70 EUR
57,90 EUR
21,00 EUR
19,50 EUR
17,50 EUR
269,00 EUR
36,90 EUR
16,90 EUR
99,90 EUR
79,90 EUR
75,00 EUR
205,00 EUR
19,90 EUR