WOCA Exterior Wood Oil natural and colour 0,75L 2,5L

New product

Size of trading unit: 0,75L; 2,5L


  • Provides a strong water- and dirt-repellent surface
  • Enhances the natural colour and grain of the wood
  • Fast drying
  • Contains UV-protection

WOCA Logo
LieferungDelivery 2-3 Workingdays in Germany, EU + 1 week 

More details

in Stock

22,95 EUR Tax included

Shipping excluded

30,59 EUR per L

  • 0,75L
  • 2,5L

Add to wishlist

Ask about product
WOCA Exterior Wood Oil natural and colour  0,75L 2,5L

WOCA Exterior Wood Oil natural and colour 0,75L 2,5L

Size of trading unit: 0,75L; 2,5L


  • Provides a strong water- and dirt-repellent surface
  • Enhances the natural colour and grain of the wood
  • Fast drying
  • Contains UV-protection

WOCA Logo
LieferungDelivery 2-3 Workingdays in Germany, EU + 1 week 

I accept privacy policy rules  


Exterior Wood Oil
to be used outdoor for basic treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, cladding etc. Exterior Wood Oil may be used on traditional wood species such as pine and larch and on exotic species such as teak, mahogany, and ipé. Exterior Wood Oil Natural is recommended to enhance the natural colour structure of the wood. For rejuvenating of old wood surfaces, the pigmented oils are ideal as they recreate the original colour of the wood. A change of colour of the deck is also possible by applying e.g. the grey, anthracite or black oil.
The special water-based composition of oil components ensures that the product is water-dilutable and friendly to the environment. The oil ensures a strong water and dirt repellent surface. The oil enhances the natural colour and grain of wood.

Exterior Wood Oil is available in Natural as well as a number of exiting colours. All varieties have UV protection.

Consumpion: 8-12m2/L

Colour:
Natural
White
Teak
Black
Grey
Walntut
Bangkirai
Anthrazit
Larch
Redbrown
Silver

exterior oil


Technical Data

Product properties
Declaration: Vegetable oil components, isoparaffin, pigments.
Form: Liquid
Density: 0,9-1,1
Colours: 12 colours
Odour: Faint
Application tools: A polishing machine with beige polishing pad. Paintroller and cotton cloths.
Cleaning of tools: With Solvent.
Disposal Empty containers and residues to be disposed of according to local regulations.
Available pot sizes: 0,75 L - 2.5 L
Storage Store safely, out of reach of children Do not expose to heat (e.g. sunlight). Store frost-free.

1. Clean new wooden surfaces as well as old surfaces with WOCA Exterior Wood Cleaner before starting the oil treatment.

2. Then leave the wood to dry for at least 24 hours so that the humidity is not above 17%. Sand down any rough wood fibres with sandpaper, grit 120.
3 Make the application in dry weather only, min. temp. 13°C. Avoid direct sunlight and high temperatures.
4 Stir the oil thoroughly before use.
5 Apply an even and thin coat of oil with a brush. Treat the end grain wood first. The wet oil may have a white shade. When the water has evaporated after a few minutes, the wood will appear oiled.
6 Wipe off any excess oil with clean cotton cloths after no more than 5 minutes. Take particular care of removing excess oil from joints and grooves.
7 If the surface does not appear saturated with oil, repeat steps 5 and 6.
8 When the wood is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hard-wearing surface.
9 It takes 24 to 48 hours for the oil to harden thoroughly, depending on weather conditions and outdoor temperature. The wood must not be exposed to water during this period.

Repeat the oil treatment when required. Start cleaning the surface with WOCA Exterior Wood Cleaner. Then follow the steps under basic treatment.

Customers who bought this product also bought:

29 other products in the same category: