WOCA Master Colour Oil 2,5L

The floor or woodwork should be freshly sanded and completely clean, dry, and free from stains before the application of the Colour Oil. Clean the floor with 125 ml Wood Cleaner mixed into 5 litre water. The Colour Oil requires a uniform surface. Transverse sanding traces must be removed with a sanding disc grit 120-150.

Product, room and floor temperature should be between 15°C-35°C (59˚F-95˚F). Ensure good ventilation at all times during the application and drying time.

1.Shake the container with Colour Oil well before and during application.

2.Apply the oil in an even coat onto an area of approx. 10 m2 with a short-haired paint roller. Let the floor absorb the oil for approx. 20 min. Subsequently, the oil is worked into the wood with a yellow or red polishing pad either manually or for large areas with a floor machine. Polish for approx. 15 min. till the floor appears saturated with oil.

3. Beware! Should any excess oil appear on the surface, remove this with cloths or paper or scrape onto next section of floor to be oiled. Buff floor with white polishing pads and with lint-free cotton cloths under the floor machine.

4.The colour oiled floor is pre-hardened after approx. 6-8 hours at room temperature of 20°C (68˚F) and completely hardened after 7 days.

5. If a silk-mat surface is required, the finished floor may be buffed with 1 dl of Colour Oil to 10 m2 of floor. This is done after the pre-hardening time and the oil must be polished carefully into the floor.

6. Cover walking areas with corrugated cardboard for 7 days.

7. Clean with Natural Soap. Maintain with Maintenance Paste or Colour Oil, but first clean with Wood Cleaner.