Oli Natura Wood soap 1L

Care & cleaning

DRY CLEANING: Daily cleaning of oiled / hard wax oil-treated floors should be carried out dry with a broom or vacuum cleaner, as sand and dust act like sandpaper and can cause fine scratches. Loose dust on furniture surfaces can be easily removed with a cloth.

WET CLEANING: For regular cleaning with water, the mild „OLI-NATURA wood soap“ is ideal. It is specifically designed for the needs of oiled / hard wax oil-treated hardwood floors, floorboards, wooden stairs and furniture surfaces, and ensures rapid cleanliness and restoration of oil without leaching or attacking the wood.

APPLICATION: Shake well before use! Pour OLI-NATURA wood soap at a ratio of 1:200 into lukewarm water, wipe surface and leave to dry. Finished!  For stubborn stains, do not dilute before use. Wipe off with water afterwards. Mixture: 25 ml to 5 litres / 50 ml to 10 litres.

RESTORATIVE TREATMENT AND MAINTENANCE: From time to time the oiled or hard wax oil-treated wood should be given some restorative treatment and maintenance. This will renew the protective effect and buff out slight scratches. Previously hard wax oil-treated surfaces should be treated at regular intervals with „OLI-NATURA wood care wax“. Oiled wood, however, should be restored with „OLI-NATURA wood care oil“. The entire surface can be treated, but it is also possible to treat only specific areas.  After such treatment, the wood is anti-static and thus attracts little dust.

APPLICATION: The surface must be totally clean, dry, and free from dust and grease before treatment. 

1.1 Full-surface restorative treatment for parquet: Apply approximately 10-20 g/m² (50-100 m²/l) of OLI-NATURA wood care oil or wood care wax thinly and evenly with a mop or a sprayer; allow to take effect for a short time (max. 10 minutes) and polish in with a white pad by hand or with a polishing machine. 1.2. Partial restorative treatment for parquet: Soak a white pad with wood care oil or wood care wax (10-20 g / m²) and rub in. Remove any excess with a dry cotton cloth after a maximum of 10 minutes. 

2.0. Restorative treatment for stairs: Soak a white pad with OLI-NATURA wood care oil or wood care wax (10-20 g / m²) and rub in. Remove any excess with a dry cotton cloth after a maximum of 10 minutes. 

3.0. Restorative treatment for furniture: Pour OLI-NATURA wood care oil or wood care wax onto a clean, lint-free cotton cloth and apply evenly and thinly along the grain. Remove any excess with a dry cotton cloth after a maximum of 10 minutes.

Note: Let the impregnated surface dry for a minimum of 12 hours, preferably overnight. Do not wet wipe for the first few days. In the case of sensitive surfaces, test first on an inconspicuous area.

Important: Oil soaked cloths / pads may spontaneously combust due to heat accumulation. They should therefore be cleaned or soaked in water immediately after use.